225/50R17 tire size in inches

Nominal 225/50R17 dimensions

Overall diameter

25.86 in656.8 mm

Section width

8.86 in225 mm

Sidewall height

4.43 in112.5 mm

Circumference

81.24 in2,063.4 mm

Rim diameter

17 in

Revolutions per mile

780nominal, from geometric circumference

Inch notation

25.9x8.9R17approximate

Where 225/50R17 fits

• Inch class: 25.86 in is 0.14 in short of a true 26 inches, inside the 26-inch class (25.50 to 26.49 in).
• Profile: the 17-inch rim plus two 4.43 in sidewalls make up the overall diameter, and the sidewalls are 34% of it. At 50 series that is a mid profile, between low-profile performance sizes and tall truck sizes.
• Same 17-inch rim: the next taller catalog size is 215/55R17 (26.31 in, +1.75%) and the next shorter is 245/45R17 (25.68 in, -0.69%).
• Same 225 mm width: the closest in diameter are 225/40R18 (25.09 in, -2.98%), 225/55R16 (25.74 in, -0.44%), 225/45R18 (25.97 in, +0.44%), 225/60R16 (26.63 in, +2.98%). At the same width, a different profile or rim changes sidewall height and overall diameter, not section width.

Reading the marking: 225 is the section width in millimeters, 50 is the sidewall height as a percentage of that width, and R17 means radial construction for a 17-inch rim. Percentages are measured from 225/50R17.

Similar sizes on other rim diameters

Within 3% of 225/50R17's overall diameter, nearest first. The speed column is the actual speed when a speedometer calibrated for 225/50R17 reads 60 mph.

For a size without a comparison page, open 225/50R17 in the calculator and enter that size as the proposed tire.

Important: These results compare nominal dimensions. They do not confirm vehicle fitment. Actual clearance varies by tire model, approved rim width, wheel construction, suspension, alignment, body tolerances, steering angle, load, and brake geometry. Verify load and speed ratings and physically test-fit the complete setup before driving.

Physical checks before changing size

• Approved rim-width range for the exact tire model
• Load index and speed rating equal to or greater than vehicle requirements
• Brake-caliper, hub, and wheel-fastener compatibility
• Fender, liner, suspension, and full-lock steering clearance
• Clearance at full compression and under expected load
• Alignment, tire pressure, and manufacturer guidance
• Professional inspection when variance or clearance is uncertain

Published comparisons for 225/50R17

3 of 7 keep the 17-inch rim. Diameter changes are measured from 225/50R17.