205/75R14 tire size in inches

Nominal 205/75R14 dimensions

Overall diameter

26.11 in663.1 mm

Section width

8.07 in205 mm

Sidewall height

6.05 in153.8 mm

Circumference

82.02 in2,083.2 mm

Rim diameter

14 in

Revolutions per mile

773nominal, from geometric circumference

Inch notation

26.1x8.1R14approximate

Where 205/75R14 fits

• Inch class: 26.11 in is 0.11 in more than a true 26 inches, inside the 26-inch class (25.50 to 26.49 in).
• Profile: the 14-inch rim plus two 6.05 in sidewalls make up the overall diameter, and the sidewalls are 46% of it. At 75 series that is a very tall profile: the two sidewalls are close to half of the overall diameter.
• Same 14-inch rim: 205/75R14 is the tallest 14-inch size in the catalog. The next shorter is 185/70R14 (24.20 in, -7.31%).
• Same 205 mm width: the closest in diameter are 205/65R15 (25.49 in, -2.35%), 205/60R16 (25.69 in, -1.61%), 205/70R15 (26.30 in, +0.74%), 205/75R15 (27.11 in, +3.83%). At the same width, a different profile or rim changes sidewall height and overall diameter, not section width.

Reading the marking: 205 is the section width in millimeters, 75 is the sidewall height as a percentage of that width, and R14 means radial construction for a 14-inch rim. Percentages are measured from 205/75R14.

Similar sizes on other rim diameters

Within 3% of 205/75R14's overall diameter, nearest first. The speed column is the actual speed when a speedometer calibrated for 205/75R14 reads 60 mph.

For a size without a comparison page, open 205/75R14 in the calculator and enter that size as the proposed tire.

Important: These results compare nominal dimensions. They do not confirm vehicle fitment. Actual clearance varies by tire model, approved rim width, wheel construction, suspension, alignment, body tolerances, steering angle, load, and brake geometry. Verify load and speed ratings and physically test-fit the complete setup before driving.

Physical checks before changing size

• Approved rim-width range for the exact tire model
• Load index and speed rating equal to or greater than vehicle requirements
• Brake-caliper, hub, and wheel-fastener compatibility
• Fender, liner, suspension, and full-lock steering clearance
• Clearance at full compression and under expected load
• Alignment, tire pressure, and manufacturer guidance
• Professional inspection when variance or clearance is uncertain

Published comparisons for 205/75R14

None keeps the 14-inch rim; each one changes wheel diameter. Diameter changes are measured from 205/75R14.