245/45R20 tire size in inches

Nominal 245/45R20 dimensions

Overall diameter

28.68 in728.5 mm

Section width

9.65 in245 mm

Sidewall height

4.34 in110.3 mm

Circumference

90.10 in2,288.7 mm

Rim diameter

20 in

Revolutions per mile

703nominal, from geometric circumference

Inch notation

28.7x9.7R20approximate

Where 245/45R20 fits

• Inch class: 28.68 in is 0.32 in short of a true 29 inches, inside the 29-inch class (28.50 to 29.49 in).
• Profile: the 20-inch rim plus two 4.34 in sidewalls make up the overall diameter, and the sidewalls are 30% of it. At 45 series that is a low profile: less sidewall between the rim and the road, so the ride is usually firmer and the wheel is more exposed to potholes and curbs.
• Same 20-inch rim: the next taller catalog size is 285/40R20 (28.98 in, +1.03%) and the next shorter is 275/40R20 (28.66 in, -0.07%).
• Same 245 mm width: the closest in diameter are 245/40R21 (28.72 in, +0.12%), 245/70R16 (29.50 in, +2.87%), 245/65R17 (29.54 in, +2.99%), 245/75R16 (30.47 in, +6.23%). At the same width, a different profile or rim changes sidewall height and overall diameter, not section width.

Reading the marking: 245 is the section width in millimeters, 45 is the sidewall height as a percentage of that width, and R20 means radial construction for a 20-inch rim. Percentages are measured from 245/45R20.

Similar sizes on other rim diameters

Within 3% of 245/45R20's overall diameter, nearest first. The speed column is the actual speed when a speedometer calibrated for 245/45R20 reads 60 mph.

For a size without a comparison page, open 245/45R20 in the calculator and enter that size as the proposed tire.

Important: These results compare nominal dimensions. They do not confirm vehicle fitment. Actual clearance varies by tire model, approved rim width, wheel construction, suspension, alignment, body tolerances, steering angle, load, and brake geometry. Verify load and speed ratings and physically test-fit the complete setup before driving.

Physical checks before changing size

• Approved rim-width range for the exact tire model
• Load index and speed rating equal to or greater than vehicle requirements
• Brake-caliper, hub, and wheel-fastener compatibility
• Fender, liner, suspension, and full-lock steering clearance
• Clearance at full compression and under expected load
• Alignment, tire pressure, and manufacturer guidance
• Professional inspection when variance or clearance is uncertain

Published comparisons for 245/45R20

2 of 3 keep the 20-inch rim. Diameter changes are measured from 245/45R20.