225/65R16 tire size in inches

Nominal 225/65R16 dimensions

Overall diameter

27.52 in698.9 mm

Section width

8.86 in225 mm

Sidewall height

5.76 in146.3 mm

Circumference

86.44 in2,195.7 mm

Rim diameter

16 in

Revolutions per mile

733nominal, from geometric circumference

Inch notation

27.5x8.9R16approximate

Where 225/65R16 fits

• Inch class: 27.52 in is near the bottom of the 28-inch class (27.50 to 28.49 in), so some listings call it a 27-inch tire.
• Profile: the 16-inch rim plus two 5.76 in sidewalls make up the overall diameter, and the sidewalls are 42% of it. At 65 series that is a tall profile: the extra sidewall absorbs more of each bump and flexes more in corners.
• Same 16-inch rim: the next taller catalog size is 215/70R16 (27.85 in, +1.22%) and the next shorter is 235/60R16 (27.10 in, -1.50%).
• Same 225 mm width: the closest in diameter are 225/55R17 (26.74 in, -2.80%), 225/50R18 (26.86 in, -2.39%), 225/70R15 (27.40 in, -0.41%), 225/60R17 (27.63 in, +0.41%). At the same width, a different profile or rim changes sidewall height and overall diameter, not section width.

Reading the marking: 225 is the section width in millimeters, 65 is the sidewall height as a percentage of that width, and R16 means radial construction for a 16-inch rim. Percentages are measured from 225/65R16.

Similar sizes on other rim diameters

Within 3% of 225/65R16's overall diameter, nearest first. The speed column is the actual speed when a speedometer calibrated for 225/65R16 reads 60 mph.

For a size without a comparison page, open 225/65R16 in the calculator and enter that size as the proposed tire.

Important: These results compare nominal dimensions. They do not confirm vehicle fitment. Actual clearance varies by tire model, approved rim width, wheel construction, suspension, alignment, body tolerances, steering angle, load, and brake geometry. Verify load and speed ratings and physically test-fit the complete setup before driving.

Physical checks before changing size

• Approved rim-width range for the exact tire model
• Load index and speed rating equal to or greater than vehicle requirements
• Brake-caliper, hub, and wheel-fastener compatibility
• Fender, liner, suspension, and full-lock steering clearance
• Clearance at full compression and under expected load
• Alignment, tire pressure, and manufacturer guidance
• Professional inspection when variance or clearance is uncertain

Published comparisons for 225/65R16

None keeps the 16-inch rim; each one changes wheel diameter. Diameter changes are measured from 225/65R16.